A 25 - 200va 4 step leading - edge control dimmer for mounting inside light fittings.
The SED200IM4 is the updated model of the SED200IM4F with built in fuse which was discontinued many years ago.
01/08/18 - This model is now discontinued. The Hopestar LD-600 can replace this model although the maximum output is 150w.
A rotary dimmer for halogen floor lamps.
This transformer fits directly into the light fitting.
27/07/13 - The SED100PRS is being phased out and replaced with SED100PRF. The F meaning the replacement unit has a removable fuse. Both units have the same specifications. Either model may be sent depending on stock quantity.
02/01/16 - This product is now a special order. If in stock with the supplier delivery is around a week once the order has been placed.
07/01/16 - This product is now discontinued. Our suppliers no longer have any in stock.
One of Eaglerise's newest LED Power supply transformers with a rating of 1w.
01/02/22 - This model is now discontinued. Eaglerise inform us that the SLP03SS can be used as a replacement.
The SLP03SS is a 3w constant current LED Power supply that can be used in a 3x1 configuration.
20/11/23 - The SLP03SS is discontinued. An alternative model is the Huibolong HLV3512LB.
One of Eaglerise's newest LED Power supply transformers with a rating of 3w.
This model can also be used to replace the Eaglerise ELP03SS1.
11/10/23 - This model has been discontinued. It can be replaced with the Huibolong HLV7006LB.
One of Eaglerise's newest LED drivers from their EIP range.
This is a NON dimmable LED driver.
This LED driver replaces the Eaglerise ELP6X1LS as from 1st October 2014.
12/05/20 - This unit has been discontinued by Eaglerise.
10/11/24 - The Huibolong HLV35008R1 is the only model currently on the market that is virtually identical to the EIP008C0350LS due to its low powerband.
One of Eaglerise's newest LED drivers for 2021.
This is a NON dimmable LED driver.
500mA is an unusual powerband in the UK however it is becoming more popular with lighting manufacturers for smaller light fittings.
One of Eaglerise's newest LED Drivers for 2021.
This unit has a 9.1w output at 700mA.
13/04/2022 - This model has now been discontinued. Eaglerise advise that the EBP012CO700CHP is an alternative model.
One of Eaglerise's newest LED Power supply transformers with a rating of up to 9w.
These LED Drivers feature a constant current of 700mA at 9w.
05/02/24 - This model is now discontinued.
One of Eaglerise's newest drivers in their LED range for 2021.
Capable of 12w at 700mA.
This is a NON dimmable LED driver.
This model can replace the Huibolong HLV7018R1 LED Driver, SELF SLT-12-700IF and SLT12-700IFG and the Eaglerise EIP012C0700L2 model.
24/08/23 - This model is now discontinued. An alternative is the Huibolong HLV70012R1.
The EIP020V0120USS is one of Eaglerises latest range of superflat, ultra lightweight LED Drivers.
This model incorporates a constant voltage of 12v DC giving 20w of power.
This is a NON dimmable LED driver.
27/10/21 - This model is now discontinued. An alternative model is the SELF SLT20-12VFG.
The EIP021C0350L1 is one of a new range of constant current LED Drivers produced by Eaglerise and incorporates a constant current of DC350mA giving 21w of power and is NON dimmable.
This unit can also replace the Eaglerise EIP021C0350LS and LX models and is the choice replacement for the Eaglerise ELP18X1LS.
The SLT6-350IL is the first and original version of this model.
Over the years it has been updated with the ILS and IL-4 models yet the most popular is the IL, which were mass produced. They are extremely popular with customers converting mirrors using halogen or ballast transformers to new LED lighting and can also be used with the SELF Touch Dimmers.
The SLT6-350IL is suitable for:
Constant Voltage 24v lamp connected in parallel at 300mA or 7.2w
Constant Current 1w lamps rated at 350mA connected in series 1-6 lamps
The product features a built in protection circuit and will shut down in the event of a fault such as: open circuit, short circuit, over load or over temperature. The unit will restart automatically after the fault has been rectified.
This model is commonly found in Dimplex electric fire units (DAN20BR - 1870w-2000w) to control the lighting and can also be used to replace the Vega EHT-6-H-350 LED Driver.
This is a NON dimmable LED driver.
03/07/23 - This model can be used to replace the MetalArredo SLT6-350IL-5.
The SLT6-350ILS is the first revised model of the SLT6-350IL.
These are extremely popular with customers converting mirrors using halogen or ballast transformers to new LED lighting and can also be used with the SELF Touch Dimmers.
The SLT6-350ILS is suitable for:
Constant Voltage 24v lamp connected in parallel at 300mA or 7.2w
Constant Current 1w lamps rated at 350mA connected in series
The product features a built in protection circuit and will shut down in the event of a fault such as: open circuit, short circuit, over load or over temperature. The unit will restart automatically after the fault has been rectified.
This model is commonly found in Dimplex electric fire units to control the lighting.
This is a NON dimmable LED driver.
13/09/24 - This model is being discontinued in favour of the SLT6-350iL.
The SLT6-350IL-4 is the second revised model of the SLT6-350IL.
These are extremely popular with customers converting mirrors using halogen or ballast transformers to new LED lighting and can also be used with the SELF Touch Dimmers.
These are also commonly found in Dimplex electric fire units to control the lighting.
This is a NON dimmable LED driver.
These are so popular with customers for converting mirrors using halogen or ballast transformers to new LED lighting and can also be used with the SELF Touch Dimmers.
The SLT6-700IL-4 is suitable for:
Constant Voltage 12v lamps rated at 500mA connected in parallel to 0w - 6w
Constant Current 12v lamps rated at 700mA connected in series to 2.1w - 6.3w
The product features a built in protection circuit and will shut down in the event of a fault such as: open circuit, short circuit, over load or over temperature. The unit will restart automatically after the fault has been rectified.
This model is commonly found in Dimplex and other electric fire units to control the lighting.
This is a NON dimmable LED driver.
25/09/22 - The SLT6-700IL-4 can be used to replace the SLT6-700ILS and the Eaglerise EBP006C0700S1.
The ever popular SELF SLT12-350IF is a 12w 350Mah LED Driver found in many bathroom mirrors and kitchen lighting.
This model is often confused with the newer SLT12-350IF-ES LED Driver and there are significant differences between the SLT12-350IF and the SLT12-350IF-ES.
The output voltage for the SLT12-350IF is 1-38v where as the voltage for the SLT12-350IF-ES is 21-43v.
The SLT12-350IF-ES CANNOT be used to replace the SLT12-350IF model. If you require the SLT12-350IF-ES model please click here.
The Huibolong HLV35012R1 is a similar replacement model for the SLT12-350IF.
01/09/23 - This model is now discontinued by the manufacturer.
The SLT12-350IF-ES is a 15.1w 350Mah LED Driver released in 2019.
The SLT350IF-ES is similar to the SLT12-350IF however it is NOT a direct replacement.
The output voltage for the SLT12-350IF-ES is 21-43v, 15.1w, where as the voltage for the SLT12-350IF is 1-38v, 12w.
With the power band being reduced this now means a minimum voltage of 21v is needed for the unit to work correctly.
SELF advise that if the minimum voltage is not reached the safety cut out will engage and result in the light bulbs flashing or strobing. This is not a fault.
The SLT12-350IF-ES CANNOT be used to replace the SLT12-350IF.
Although not the same shape the SLT12-350IF-ES can be used to replace the Huibolong HLV3543C1 LED Driver as the specifications are identical.
13/09/24 - This model is being discontinued by SELF.
SELF have released their new ES range to replace the IF range.
An increased output from 12w to 15.4w, a revised working output range of 11-22v DC and a super flat case.
This is a NON dimmable LED driver.
This model CANNOT be used to replace the SLT12-700IF (Revision 1) model. It is not compatible.
Released in 2021.
This is SELF's latest 350mA Constant Current LED Driver to hit the market.
This unit has a flat design of only 20mm and is a NON dimmable LED driver.
These are going to be extremely popular with customers for converting mirrors using halogen or ballast transformers to new LED lighting and can also be used with the SELF Touch Dimmers. This unit is a super flat design of only 14mm.
This is a NON dimmable LED driver.
26/09/24 - This model is now discontinued.
The SLT15-12VF-2s is a constant voltage LED Driver with a 15w power output.
This is a NON dimmable LED driver.
16/03/18 - The SLT15-12VF-1 is being replaced with the SELF SLT15-12VF-2S, which is exactly the same size and specification as the VF-1 model.
15/06/22 - The SLT15-12VF-2S is being phased out and replaced with the SLT15-12VF-2SZ.
28/03/23 - The SLT15-12VF-2S can be used to replace the SLT15-12VF-2 which is the exact same specification and size.
New for 2024! SELF's 30w 12v LED Driver.
This model incorporates a constant voltage of 12v DC giving 30w of power and is a NON dimmable LED driver.
The SLT30-12VLG-ES has replaced the SLT30-12VLG-E, SLT30-12VLG and the SLT30-12VL which are now discontinued.
20/05/20 - This unit can be used with the JCC Elegenti Range of white LED surface lights - JC71130 (0.4w up to 75 units), JC71132 (0.8w up to 37 units) and the JC71134 (1w up to 30 units).
The maximum length of output cable for the above sets must not exceed 8m
This model has an output rating of 3w and features constant voltage of 12Vdc.
Small, compact and is ideal for light fittings or applications with limited space.
This model can be used as an alternative to the KOSE KL3W-0250-120 LED Driver.
See attached image of the KOSE model.
