The SLT6-350IL is the first and original version of this model.
Over the years it has been updated with the ILS and IL-4 models yet the most popular is the IL, which were mass produced. They are extremely popular with customers converting mirrors using halogen or ballast transformers to new LED lighting and can also be used with the SELF Touch Dimmers.
The SLT6-350IL is suitable for:
Constant Voltage 24v lamp connected in parallel at 300mA or 7.2w
Constant Current 1w lamps rated at 350mA connected in series 1-6 lamps
The product features a built in protection circuit and will shut down in the event of a fault such as: open circuit, short circuit, over load or over temperature. The unit will restart automatically after the fault has been rectified.
This model is commonly found in Dimplex electric fire units (DAN20BR - 1870w-2000w) to control the lighting and can also be used to replace the Vega EHT-6-H-350 LED Driver.
This is a NON dimmable LED driver.
03/07/23 - This model can be used to replace the MetalArredo SLT6-350IL-5.
The SLT6-350ILS is the first revised model of the SLT6-350IL.
These are extremely popular with customers converting mirrors using halogen or ballast transformers to new LED lighting and can also be used with the SELF Touch Dimmers.
The SLT6-350ILS is suitable for:
Constant Voltage 24v lamp connected in parallel at 300mA or 7.2w
Constant Current 1w lamps rated at 350mA connected in series
The product features a built in protection circuit and will shut down in the event of a fault such as: open circuit, short circuit, over load or over temperature. The unit will restart automatically after the fault has been rectified.
This model is commonly found in Dimplex electric fire units to control the lighting.
This is a NON dimmable LED driver.
The SLT6-350IL-4 is the second revised model of the SLT6-350IL.
These are extremely popular with customers converting mirrors using halogen or ballast transformers to new LED lighting and can also be used with the SELF Touch Dimmers.
These are also commonly found in Dimplex electric fire units to control the lighting.
This is a NON dimmable LED driver.
NEW FOR 2022!
These will be popular with customers for converting mirrors using halogen or ballast transformers to new LED lighting and can also be used with the SELF Touch Dimmers.
The SLT6-700IL-4 is suitable for:
Constant Voltage 12v lamps rated at 500mA connected in parallel to 0w - 6w
Constant Current 12v lamps rated at 700mA connected in series to 2.1w - 6.3w
The product features a built in protection circuit and will shut down in the event of a fault such as: open circuit, short circuit, over load or over temperature. The unit will restart automatically after the fault has been rectified.
This model is commonly found in Dimplex and other electric fire units to control the lighting.
This is a NON dimmable LED driver.
25/09/22 - The SLT6-700IL-4 can be used to replace the SLT6-700ILS and the Eaglerise EBP006C0700S1.
The ever popular SELF SLT12-350IF is a 12w 350Mah LED Driver found in many bathroom mirrors and kitchen lighting.
This model is often confused with the newer SLT12-350IF-ES LED Driver and there are significant differences between the SLT12-350IF and the SLT12-350IF-ES.
The output voltage for the SLT12-350IF is 1-38v where as the voltage for the SLT12-350IF-ES is 21-43v.
The SLT12-350IF CANNOT be used to replace the SLT12-350IF-ES model.
If you require the SLT12-350IF-ES model please click here.
01/09/23 - This model is being discontinued by the manufacturer despite it being one of the most popular SELF models ever produced. We have secured a final 200 pieces!
The Huibolong HLV35012R1 is a similar replacement model.
The SLT12-350IF-ES is a 15.1w 350Mah LED Driver released in 2019.
The SLT350IF-ES is similar to the SLT12-350IF however it is NOT a direct replacement.
The output voltage for the SLT12-350IF-ES is 21-43v, 15.1w, where as the voltage for the SLT12-350IF is 1-38v, 12w.
With the power band being reduced this now means a minimum voltage of 21v is needed for the unit to work correctly.
SELF advise that if the minimum voltage is not reached the safety cut out will engage and result in the light bulbs flashing or strobing. This is not a fault.
The SLT12-350IF-ES CANNOT be used to replace the SLT12-350IF.
If you require the SLT12-350IF please click here.
Although not the same shape the SLT12-350IF-ES can be used to replace the Huibolong HLV3543C1 LED Driver as the specifications are identical.
New for 2020.
SELF have released their updated version of the SLT12-700IF for 2020 with the ES model which has a different power specification than the previous SLT12-700IF model.
An increased output from 12w to 15.4w, a revised working output range of 11-22v DC and a super flat case.
This is a NON dimmable LED driver.
This model CANNOT be used to replace the SLT12-700IF (Revision 1) model. It is not compatible.
Brand new for 2021.
This is SELF's latest 350mA Constant Current LED Driver to hit the market.
This unit has a flat design of only 20mm and is a NON dimmable LED driver.
These are going to be extremely popular with customers for converting mirrors using halogen or ballast transformers to new LED lighting and can also be used with the SELF Touch Dimmers. This unit is a super flat design of only 14mm.
This is a NON dimmable LED driver.
Another of SELF's LED Drivers. This model incorporates a constant voltage of 12v DC giving 15w of power.
This is a NON dimmable LED driver.
16/03/18 - The SLT15-12VF-1 is being replaced with the SELF SLT15-12VF-2S.
We will continue to supply the VF-1 model until the stock is depleted and then replace with the new VF-2S model, which is exactly the same size and specification as the VF-1 model.
15/06/22 - The SLT15-12VF-2S is being phased out and replaced with the SLT15-12VF-2SZ. Last few left.
28/03/23 - The SLT15-12VF-2S can be used to replace the SLT15-12VF-2 which is the exact same specification and size.
New for 2019! SELF's 30w 12v LED Driver.
This model incorporates a constant voltage of 12v DC giving 30w of power and is a NON dimmable LED driver.
The SLT30-12VLG-E has replaced the SLT30-12VL which is now discontinued.
20/05/20 - This unit can be used with the JCC Elegenti Range of white LED surface lights - JC71130 (0.4w up to 75 units), JC71132 (0.8w up to 37 units) and the JC71134 (1w up to 30 units).
The maximum length of output cable for the above sets must not exceed 8m
These are extremely popular with customers for converting mirrors using halogen or ballast transformers to new LED lighting and can also be used with the SELF Touch Dimmers.
This is a super flat version with a depth of 12mm. Superb for bathroom mirror LED conversions.
This is a NON dimmable LED driver.
SELF's latest touch sensor switch.
This models feature a 240v output which allows a transformer LED / Halogen to be connected to power the relevant bulbs.
There are not many touch sensor switches on the market, but these are sure to fly out the door.
Once connected a simple touch will turn the light fitting on and a second touch will turn the light off.
SELF's latest LED Controller.
This models feature a 12v input which connects to LED strip lights.
This model comes with the 4 way junction box (JB-4B) which is normally a chargeable part.
The KZQ30-12E is also compatible with JCC Lighting's Ragoza LED Kit.
To use this controller a separate 12v constant voltage LED driver will need to be used as the input supply on the controller is 12v.
The unit has 4 settings: One beep and release to choose one of 7 colours. Two beeps and release will flash and change 7 colours automatically. Three beeps and release will change the colours gradually. Four beeps and release will turn the unit off.
This is a cracking piece of kit and can be used with a whole array of different manufactures LED strip lighting. (Flexi strip)
These are extremely popular with customers for converting mirrors using halogen or ballast transformers to new LED lighting and can also be used with the SELF Touch Dimmers.
This is a super flat version with a depth of 14mm. Superb for bathroom mirror LED conversions.
This is a NON dimmable LED driver.
As the only UK supplier of SELF products we are pleased to stock this very popular transformer.
These are new to the market and very popular.
We use these sensors to switch on the lighting in our stock cupboards. They can also be used in wardrobes and inside kitchen cupboards to replace those large, bulky, old fashioned door pin switches.
A wave of the hand turns the lighting on and a second wave of the hand turns them off. It's that simple!!
This sensor switch is ideal for clothing or kitchen cupboards and with the sensor switch being compact it is easily hidden.
The push in IR sensor head is a discreet 13mm.
THIS MODEL CANNOT BE USED FOR BATHROOM MIRRORS OF ANY KIND!!
As the only UK supplier of SELF products we are pleased to stock this very popular sensor switch.
These are new to the market and very popular. High tech equipment at affordable prices.
We use these sensor switches built in to the side of mirrors located in our male and female toilets.
A wave of the hand turns the mirror lighting on and a second wave of the hand turns them off. It's that simple!!
The model comes with a push in IR sensor head.
24/06/19 - This model can be used to replace the discontinued HZK217C and the HZK218C-1, -2, -3 and -4.