The greater LED improves the bigger the applications and power specifications that are needed.
The HLVA5050LA is Huibolong's answer to the 1050mA Current with a 50w output to rival the Eaglerise EIP 1050mA range.
Huibolong have taken note that Eaglerise have discontinued many EIP models similar to the HLVA5050LA and decided to produce this model.
This model will replace the Eaglerise EIP050C1050LS / L1.
SaveMyLight is the only retailer of this LED driver.
This is the biggest Constant Current model we stock with a whopping 1500mA at 50 - 60w.
The greater LED improves the bigger the applications and power specifications that are needed.
We are hearing from customers that this type of model is commonly found in moving elevators, lifts, shop signage and even mini street lights.
The HLVF0060LA is Huibolong's answer to the 1500mA Current with a 50 - 60w Output to rival the Eaglerise EIP and ELP 1500mA range.
Huibolong have taken note that Eaglerise have discontinued many ELP and EIP models similar to the HLVF0060LA and decided to produce this model as an alternative to them.
Most common Eaglerise models are ELP050C1500L1, EIP050C1500LS, EIP050C1500L1, EIP060C1500LS, which the HLVF0060LA can replace.
SaveMyLight is the only retailer of this LED driver.
Jindel have been quiet for some years concentrating on the Chinese & Taiwan wholesale lighting market.
Jindel are still producing some of the smallest 12v halogen transformers currently available on the market and now branching into LED Drivers.
Jindel have taken note of our comments regarding a gap in the market for an oblong shaped constant voltage LED driver and have produced the MH-QD range.
Many light fittings are installed with an oblong halogen transformer and circular LED Drivers will simply not fit inside the transformer housing due to their larger diameter..........
Cue the MH-QD1617 LED Driver
The QD1617 is the only oblong LED Driver currently on the market capable of replacing the Eaglerise SET150CS, SET160CK, SET210CS and the Huibolong HTV160C1 and HTV210C1 halogen transformers.
1) Larger secondary terminal block allows a thicker core wire to be inserted.
2) Red LED light located on the secondary side that illuminates when the LED Driver is powered.
3) 8 separate air vents for increased ventilation when in use.
4) An earthing point is supplied on the primary terminal block.
5) Suitable for the North American market.
6) 5w minimum loading.
7) Large 12mm diameter central hole (M12 studding).
This model is not compatible with halogen light bulbs.
We don't know what is going on over at Jindel, but their designers are coming out with some cracking models that are going to transform the LED market. Whatever they are putting in the coffee, it's working!! GO JINDEL!!
This is a constant current 550mA LED Driver with a secondary of 22-35v and a 15-20w output.
SaveMyLight are the only worldwide retailer of replacement Anchorn lighting transformers. Anchorn are back and back with style. Their latest range of circular halogen transformers is their 3rd generation and they get better every time.
This very small unit is ideal for bedside or reading lighting or where a transformer is needed to fit into a very small space.
This is a micro compact 35w halogen transformer with a minimum input of 10w and comes with fly cables for both input and output.
These are going to be very popular!!
This unit is not compatible with LED bulbs.
The Baon Shin Ya BSY-996A 240v sliding foot dimmer.
This mains voltage sliding foot dimmer can be used to replace any mains voltage sliding foot dimmer produced by any manufacturer that requires a single dimmer operation.
This unit has a maximum output of 300w.
Can be used as a hand or foot dimmer!!!
This is a 240v output dimmer and will not work with 12v bulbs or LED bulbs.
The Baon Shin Ya BSY-988 240v sliding foot dimmer.
This mains voltage sliding foot dimmer can be used to replace any mains voltage sliding foot dimmer produced by any manufacturer that requires a two light operation from one dimmer.
These are great for light fittings with a second halogen bulb fitted ie uplight with flexible reading light attached.
This unit is suited for a 300w bulb on Output 1 and up to 100w on Output 2 which is controlled by a separate on off switch.
The on off switch is larger than standard and measures 15mm x 15mm.
Can be used as a hand or foot dimmer!!!
This is a 240v output dimmer and will not work with 12v bulbs or LED bulbs.
The GKMT300C mains voltage sliding foot dimmer that can be used with any mains voltage halogen luminaires made by any manufacturer.
Even if your light fitting does not have a sliding dimmer this can be installed into the wiring cord to convert your exisiting light for dimming.
This is a mains voltage dimmer and will not work with 12v light fittings or LED bulbs.
This 240v mains dimmer can be used as a replacement to the Kaoyi 527S group of mains dimmer transformers.
The GKMT500BV1 is a mains voltage sliding foot dimmer that can be used with any mains voltage halogen luminaires made by any manufacturer.
Even if your light fitting does not have a sliding dimmer this can be installed into the wiring cord to convert your exisiting light for dimming.
This is a mains voltage dimmer and will not work with 12v light fittings or LED bulbs.
This 240v mains dimmer can be used as a replacement to the Kaoyi 527S group of mains dimmer transformers.
The GKMT300BV2 is a mains voltage sliding foot dimmer that can be used with any mains voltage halogen luminaires made by any manufacturer.
Even if your light fitting does not have a sliding dimmer this can be installed into the wiring cord to convert your exisiting light for dimming.
This is a mains voltage dimmer and will not work with 12v light fittings or LED bulbs.
This 240v mains dimmer can be used as a replacement to the Kaoyi 527G & S group of mains dimmer transformers.
28/10/24 - This model is now discontinued.
The GKMT300T/O is a mains voltage twin sliding foot dimmer that can be used with any mains voltage halogen light fitting made by any manufacturer.
These are great for 240v halogen light fittings with a second halogen bulb fitted. i.e main light with flexible reading 240v light attached.
This unit can cope with a 300w bulb on the first output and up to 300w on the second output and can be controlled by two separate on/off sliding switches.
This unit is considerably large and would also benefit people who are hard of sight.
Can be used as a hand or foot dimmer!!!
This is a mains voltage dimmer and will not work with 12v light fittings or LED bulbs.
This model can be used as an alternative to the Kaoyi KFD-525S sliding dimmer.
The Huibolong HT6024V1 is suitable for all kinds of low voltage halogen floor lamps up to 60w.
These are extremely popular sliding foot dimmers that come with a variety of light fittings purchased from large lighting stores.
This model has a clear casing and is not compatible with LED bulbs.
The HT6024V1 can be used to replace the Jing Neng JN3060F, Anchorn AA-3202RVB1 and Anchorn AA-3202RVB2 dimmer.
20/04/22 - In the latest revision to the product Huibolong have increased the case size. This does not affect the power specification of the product.
The Huibolong HT6024V1 is suitable for all kinds of low voltage halogen floor lamps up to 60w.
These are extremely popular sliding foot dimmers that come with a variety of light fittings purchased from large lighting stores.
This model has a black casing and is not compatible with LED bulbs.
The HT6024V1 can be used to replace the Jing Neng JN3060F, Anchorn AA-3202RVB1 and Anchorn AA-3202RVB2 dimmer.
20/04/22 - In the latest revision to the product Huibolong have increased the case size. This does not affect the power specification of the product.
The Huibolong HT8024V1 is suitable for all kinds of low voltage halogen floor lamps up to 80w.
These are extremely popular sliding foot dimmers that come with a variety of light fittings purchased from large lighting stores.
This model has a clear casing and is not compatible with LED bulbs.
This model can be used to replace the BSY-8070F, 70w sliding foot dimmer.
20/04/22 - In the latest revision to the product Huibolong have increased the case size. This does not affect the power specification of the product.
The Huibolong HT8024V1 is suitable for all kinds of low voltage halogen floor lamps up to 80w.
These are extremely popular sliding foot dimmers that come with a variety of light fittings purchased from large lighting stores.
This model has a black casing and is not compatible with LED bulbs.
This model can be used to replace the BSY-8070F, 70w sliding foot dimmer.
20/04/22 - In the latest revision to the product Huibolong have increased the case size. This does not affect the power specification of the product.
The Huibolong HT10524V1 is suitable for all kinds of low voltage halogen floor lamps up to 105w.
These are extremely popular sliding foot dimmers that come with a variety of light fittings purchased from large lighting stores.
This model has a clear casing and is not compatible with LED bulbs.
This unit will replace the Hopestar AL-ELVF105 and the Eaglerise SDT105FMS sliding foot dimmer.
The Huibolong HT10524V1 is suitable for all kinds of low voltage halogen floor lamps up to 105w.
These are extremely popular sliding foot dimmers that come with a variety of light fittings purchased from large lighting stores.
This model has a black casing and is not compatible with LED bulbs.
This unit will replace the Hopestar AL-ELVF105 and the Eaglerise SDT105FMS sliding foot dimmer.
The Huibolong HT15024V1 is suitable for all kinds of low voltage halogen floor lamps up to 150w.
These are extremely popular sliding foot dimmers that come with a variety of light fittings purchased from large lighting stores.
This model has a clear casing and is not compatible with LED bulbs.
The HT15024V1 can be used to replace the Anchorn AA-6202RV1 and the AA-3502RV1 dimmers.
The Huibolong HT15024V1 is a sliding foot dimmer that is suitable for all kinds of low voltage halogen floor lamps up to 150w.
These are extremely popular sliding foot dimmers that come with a variety of light fittings purchased from large lighting stores.
This model has a black casing and is not compatible with LED bulbs.
The HT15024V1 can be used to replace the Anchorn AA-6202RV1 and the AA-3502RV1 dimmers.
Huibolong have released their new plug in range of halogen electronic transformers in the European 2 pin and UK 3 pin to rival other manufacturers and from what we hear they are doing just that.
These plug in transformers come in either a clear or black casing.
The HTV60L2 is for low voltage halogen floor lamps with an output of 60w.
This unit is not compatible with LED bulbs.
NOTE: We stock the wiring cord with adaptor that fits this dimmer plug as well as many other manufacturer's dimmer plugs.
These replacement cords are great if the pins have snapped off of your wiring cord or the cord has become damaged in some way.
See:- Cord With Switch 2 DIN 41529
This plug will replace the Kaoyi KP-60 2 pin European plug, which is being discontinued.
Introducing the Waiberlon range of Electronic Ballasts.
This ballast is equipped with a 1 x 18w output with various other configurations.
This unit is not compatible with LED bulbs.
SaveMyLight are the only UK retailer of replacement Hytec lighting transformers.
Hytec have really upped their game over the last year. Having visited their new factory in Guangdong and seen their process for manufacturing and quality control it is a pleasure to sell their products.
The Hytec HY-3360B is a twin rotary dimmer that has 2 x 240v outputs and removeable fuse.
Output 1 is controlled via dimmer switch up to 300w.
Output 2 is controlled via dimmer switch up to 100w.
Both outputs are controlled by rotary adjustment.
This transformer fits directly into lighting luminaires.
The HY-3360B is not compatible with LED bulbs.
The HY-3360B can be used to replace the Kaoyi KD323C, Baon Shin Ya 740A and Hopestar LD901 model.
The collet ring sits under the plastic rotary knob and screws onto the rotary spindle giving the plastic dimmer knob a good seating.
Will fit the majority of all Kaoyi Rotary Electronic Dimmers where applicable.
Free P+P when ordered with any transformer.
This replacement plastic dimmer knob will fit the majority of Kaoyi Rotary Electronic Dimmers.
It will not fit the Kaoyi KHT234H as the knob does not have an extended neck.
Free P+P when ordered with any transformer.
