Suitable for controlling low voltage halogen bulb light fittings.
Integrated terminal for easy installation.
Soft start extends bulb life.
Reduced size and weight due to ingenious design.
Over-load and short-circuit protection with self-resetting.
These transformers are very small and can be used in the most tightest areas or located in transformer housings.
The KT6023 can be used in most light fittings to replace another manufacturers transformer.
The KT6023 is larger than the KT6023A and cannot be used as a replacement.
16/02/17 - This model has now been discontinued. The Huibolong HTV60L1 or the Anchorn AET3202RB1 are suitable alternatives for this model.
Suitable for controlling low voltage halogen bulb light fittings.
Integrated terminal for easy installation.
Soft start extends bulb life.
Reduced size and weight due to ingenious design.
Over-load and short-circuit protection with self-resetting.
These transformers are very small and can be used in the most tightest areas or located in transformer housings.
The KT8021 can be used in most light fittings to replace another manufacturers transformer.
Suitable for controlling low voltage halogen bulb light fittings.
Integrated terminal for easy installation.
These transformers are very small and can be used in the most tightest areas or located in transformer housings.
The KT10521 can be used in most light fittings to replace another manufacturers transformer.
The KT-105MS can be used in most light fittings to replace another manufacturers transformer where space is of the upmost importance.
Due to unprecedented demand for the new MS Range, these sell out fast. Grab one quickly!!
12/11/19 - This product is now discontinued. The Huibolong HTV105L1 is a similar specification alternative however it is longer in length. Please check the dimensions to ensure fitment inside your light fitting.
The Kaoyi KA-105 is a 105w self monitoring halogen electronic transformer.
Suitable for controlling low voltage halogen floor lamps in commercial or light industrial installation.
This product is not compatible with LED bulbs.
A 50 - 210va self monitoring electronic transformer.
Suitable for controlling low voltage halogen floor lamps in commercial or light industrial installation.
10/02/19 - This product is officially discontinued. The Huibolong HTV210L1 is an alternative but is not a self monitoring unit.
http://www.savemylight.co.uk/transformer-manufacturers/huibolong/htv210l1.html#.XGBFg2kyW00
This circular transformer can be installed in most light fittings where a circular transformer is required with a maximum output of 60va.
Please note the Kaoyi KTB60 and the Eaglerise SET60CV are identical in size and specification.
29/03/19 - This model is officially discontinued by Kaoyi. An alternative is the Eaglerise SET60CV or the Huibolong HTV60CL1.
This circular transformer can be installed in most light fittings where a circular transformer is required with a maximum output of 80va.
The Kaoyi KTB80 is one of Kaoyi's more unusual transformers as it bridges the gap between 60va and 105va transformers and is not commonly found.
17/12/13 - The KTB80 has been discontinued but can be replaced with the Huibolong HTV80CL1.
This circular transformer can be installed in most light fittings where a circular transformer is required with a maximum output of 105va.
Please note the Kaoyi KTB105, Eaglerise SET105CV and Huibolong HTV105C1 are identical in specification.
03/04/18 - This model is now officially discontinued. Alternatives are the Huibolong HTV105C1, Eaglerise SET105CV and Jindel 0811 110w.
The KP-60 is a dimmer for low voltage halogen floor lamps. It is not compatible with LED bulbs.
This transformer will need a UK adaptor as the plug is supplied in a 2 pin European format.
The UK version has now been discontinued.
NOTE: We now stock the wiring cord with adaptor that fits this dimmer and a whole host of other manufacturer's dimmer plugs including Kaoyi, Hytec and Huibolong.
These replacement cords are great if the pins have snapped off your wiring cord or the cord has become damaged in some way.
See:- Cord With Switch 2 DIN 41529
This model is now discontinued. It can be replaced with the Huibolong HTV60L2 in a black or clear case. Please click here for black case or click here for clear case.
Since stopping production of this unit in 2015 Ningbo are back having realised that demand is still strong for their halogen transformer products and SaveMyLight are pleased to market these products.
The ET60A is suitable for controlling low voltage halogen bulbs up to 60w.
Reduced size and weight due to ingenious design.
This transformer is extremely small and can be used in the most tightest areas or located in transformer housings.
This unit is not compatible with LED bulbs.
Ningbo have done it again and released their range of updated halogen transformers. Ningbo have realised that there is still demand for halogen products and have revised the units 12v terminals by increasing the outputs. This stops an excess of wiring being crammed into a single output terminal block. The outputs are clearly numbered to make installation easier.
The ET105-1 is suitable for controlling low voltage 12v halogen bulbs up to 105w.
Reduced size and weight due to ingenious design.
This unit is not compatible with LED bulbs.
This LED driver gives 700mA with a 15w output running LED's At 3.6v per LED.
This is a NON dimmable LED driver.
25/09/22 - This model can being used to replace the discontinued SELF SLT12-700IF.
As the only UK supplier of SELF electronic transformers we are pleased to stock this transformer.
More commonly referred to as the 'mouse' transformer.
The bonus with this transformer is that it can be used with a leading or trailing edge dimmer.
This unit is not compatible with LED bulbs.
NOTE: This transformer can be used to replace the Kaoyi KT-105MS.
As the only UK supplier of Self electronic transformers we are pleased to retail this transformer.
This has got to be the smallest 105va transformer on the market, if not the world at a diameter of 70mm!!
This transformer is great for those light fittings with a very small housing and replacing those Chinese 60 x 60mm box transformers.
The bonus with this transformer is that the two secondary cables can be up to 4m long instead of the standard 2m.
10/03/20 - This model is now discontinued. Similar models are HTV105C1 and SET105CV although the diameters are slightly larger.
As the only UK supplier of Self electronic transformers we are pleased to retail this transformer.
The bonus with this transformer is that it can be used with leading or trailing edge dimmers.
As the only UK supplier of SELF electronic transformers we are pleased to retail this transformer.
The bonus with this transformer is that it can be used with leading or trailing edge dimmers and it features two 12v outputs.
14/01/20 - This model is now discontinued.
One of SELF's newest LED converters.
These are extremely popular with customers for converting mirrors using halogen or ballast transformers to new LED lighting and can also be used with the SELF Touch Dimmers.
This is a NON dimmable LED driver.
The Huibolong HLV1206L1 can be used as a replacement.
These are going to be extremely popular with customers for converting mirrors using halogen or ballast transformers to new LED lighting and can also be used with the SELF Touch Dimmers.
This is a NON dimmable LED driver.
24/09/18 - This model can replace the discontinued Eaglerise ELP4X3LS and the EIP012C0700LS / EIP012C0700L2 LED Driver.
17/12/20 - This product is now discontinued. The SLT12-700IF-ES CANNOT be used as a replacement as the specifications are different.
13/01/24 - The Huibolong HLV70012R1 is a similar model that could be used. Please check the dimensions to ensure fitment inside your light fitting.
09/06/14 - New SELF model
These are extremely popular with customers for converting mirrors using halogen or ballast transformers to new LED lighting and can also be used with the SELF Touch Dimmers.
This is a super flat version with a depth of 14mm. Superb for bathroom mirror LED conversions.
This is a NON dimmable LED driver.
As the only UK supplier of SELF products we are pleased to stock this very popular sensor switch.
These are new to the market and very popular. High tech equipment at affordable prices.
We use these sensor switches built in to the side of mirrors located in our male and female toilets.
A wave of the hand turns the mirror lighting on and a second wave of the hand turns them off. It's that simple!!
This model comes with the push in IR sensor head.
26/12/23 - The SELF HZK218C can replace this model.
As the only UK supplier of SELF products we are pleased to stock this very popular PIR sensor.
These are new to the market and very desirable.
With the current Covid-19 situation still active and the UK Government's emphasis of 'Hands, Face, Space', to avoid close contamination and stop the spread of Covid-19 this PIR sensor switch is ideal for this exact scenario.
With the SHE-B-250 fitted no longer will you need to physically touch a wall or mirror mounted on off light switch.
Simply walk into the room and the controller will turn on the switch for output when it detects motion and will turn off automatically after the adjustable delay without the detection of motion.
This PIR sensor switch is ideal for hospital wards, Government buildings, public street toilets, prisons, nightclub toilets etc where only motion is required to switch on a lighting appliance or wall mounted mirror.