This circular transformer can be installed in most light fittings where a circular transformer is required with a maximum output of 60va.
Please note the Kaoyi KTB60 and the Eaglerise SET60CV are identical in size and specification.
29/03/19 - This model is officially discontinued by Kaoyi. An alternative is the Eaglerise SET60CV or the Huibolong HTV60CL1.
This circular transformer can be installed in most light fittings where a circular transformer is required with a maximum output of 80va.
The Kaoyi KTB80 is one of Kaoyi's more unusual transformers as it bridges the gap between 60va and 105va transformers and is not commonly found.
17/12/13 - The KTB80 has been discontinued but can be replaced with the Huibolong HTV80CL1.
This circular transformer can be installed in most light fittings where a circular transformer is required with a maximum output of 105va.
Please note the Kaoyi KTB105, Eaglerise SET105CV and Huibolong HTV105C1 are identical in specification.
03/04/18 - This model is now officially discontinued. Alternatives are the Huibolong HTV105C1, Eaglerise SET105CV and Jindel 0811 110w.
The KP-60 is a dimmer for low voltage halogen floor lamps. It is not compatible with LED bulbs.
This transformer will need a UK adaptor as the plug is supplied in a 2 pin European format.
The UK version has now been discontinued.
NOTE: We now stock the wiring cord with adaptor that fits this dimmer and a whole host of other manufacturer's dimmer plugs including Kaoyi, Hytec and Huibolong.
These replacement cords are great if the pins have snapped off your wiring cord or the cord has become damaged in some way.
See:- Cord With Switch 2 DIN 41529
This model is now discontinued. It can be replaced with the Huibolong HTV60L2 in a black or clear case. Please click here for black case or click here for clear case.
Since stopping production of this unit in 2015 Ningbo are back having realised that demand is still strong for their halogen transformer products and SaveMyLight are pleased to market these products.
The ET60A is suitable for controlling low voltage halogen bulbs up to 60w.
Reduced size and weight due to ingenious design.
This transformer is extremely small and can be used in the most tightest areas or located in transformer housings.
This unit is not compatible with LED bulbs.
Ningbo have done it again and released their range of updated halogen transformers. Ningbo have realised that there is still demand for halogen products and have revised the units 12v terminals by increasing the outputs. This stops an excess of wiring being crammed into a single output terminal block. The outputs are clearly numbered to make installation easier.
The ET105-1 is suitable for controlling low voltage 12v halogen bulbs up to 105w.
Reduced size and weight due to ingenious design.
This unit is not compatible with LED bulbs.
This LED driver gives 700mA with a 15w output running LED's At 3.6v per LED.
This is a NON dimmable LED driver.
25/09/22 - This model can being used to replace the discontinued SELF SLT12-700IF.
Newly released on 24/06/19.
These are the latest hand touch dimmers that can be used with halogen or LED bulbs and are suitable for our USA and Canadian customers using 110-120v.
No more trying to work out the Mah rating of the LED bulbs you wish to use. This unit takes into account those ratings.
Halogen LED
110-127v 25-80w 110-240v 4-25w
220-240v 25-160w
To function press the button located on the top of the unit. Press briefly to switch the light on and off. A hold press will dim the light. When the desired level is achieved release the push button. Dimming automatically stops when the minimum or maximum level is reached.
Even if your light fitting does not have a hand touch dimmer this can be installed into the wiring cord to convert your exisiting light for dimming.
NOT SUITABLE FOR 12v BULBS
This model can be used as an alternative to the discontinued Hopestar LD-601 Touch Dimmer.
Newly released on 24/06/19.
These are the latest hand touch dimmers that can be used with halogen or LED bulbs and are suitable for our USA and Canadian customers using 110-120v.
No more trying to work out the Mah rating of the LED bulbs you wish to use. This unit takes into account those ratings.
Halogen LED
110-127v 25-80w 110-240v 4-25w
220-240v 25-160w
To function press the button located on the top of the unit. Press briefly to switch the light on and off. A hold press will dim the light. When the desired level is achieved release the push button. Dimming automatically stops when the minimum or maximum level is reached.
Even if your light fitting does not have a hand touch dimmer this can be installed into the wiring cord to convert your exisiting light for dimming.
NOT SUITABLE FOR 12v BULBS
Newly released on 24/06/19.
These are the latest hand touch dimmers that can be used with halogen or LED bulbs and are suitable for our USA and Canadian customers using 110-120v.
No more trying to work out the Mah rating of the LED bulbs you wish to use. This unit takes into account those ratings.
Halogen LED
110-127v 25-80w 110-240v 4-25w
220-240v 25-160w
To function press the button located on the top of the unit. Press briefly to switch the light on and off. A hold press will dim the light. When the desired level is achieved release the push button. Dimming automatically stops when the minimum or maximum level is reached.
Even if your light fitting does not have a hand touch dimmer this can be installed into the wiring cord to convert your exisiting light for dimming.
NOT SUITABLE FOR 12v BULBS
As the only UK supplier of SELF electronic transformers we are pleased to stock this transformer.
More commonly referred to as the 'mouse' transformer.
The bonus with this transformer is that it can be used with a leading or trailing edge dimmer.
This unit is not compatible with LED bulbs.
NOTE: This transformer can be used to replace the Kaoyi KT-105MS.
As the only UK supplier of Self electronic transformers we are pleased to retail this transformer.
This has got to be the smallest 105va transformer on the market, if not the world at a diameter of 70mm!!
This transformer is great for those light fittings with a very small housing and replacing those Chinese 60 x 60mm box transformers.
The bonus with this transformer is that the two secondary cables can be up to 4m long instead of the standard 2m.
10/03/20 - This model is now discontinued. Similar models are HTV105C1 and SET105CV although the diameters are slightly larger.
As the only UK supplier of Self electronic transformers we are pleased to retail this transformer.
The bonus with this transformer is that it can be used with leading or trailing edge dimmers.
As the only UK supplier of SELF electronic transformers we are pleased to retail this transformer.
The bonus with this transformer is that it can be used with leading or trailing edge dimmers and it features two 12v outputs.
14/01/20 - This model is now discontinued.
One of SELF's newest LED converters.
These are extremely popular with customers for converting mirrors using halogen or ballast transformers to new LED lighting and can also be used with the SELF Touch Dimmers.
This is a NON dimmable LED driver.
The Huibolong HLV1206L1 can be used as a replacement.
These are going to be extremely popular with customers for converting mirrors using halogen or ballast transformers to new LED lighting and can also be used with the SELF Touch Dimmers.
This is a NON dimmable LED driver.
24/09/18 - This model can replace the discontinued Eaglerise ELP4X3LS and the EIP012C0700LS / EIP012C0700L2 LED Driver.
17/12/20 - This product is now discontinued. The SLT12-700IF-ES CANNOT be used as a replacement as the specifications are different.
13/01/24 - The Huibolong HLV70012R1 is a similar model that could be used. Please check the dimensions to ensure fitment inside your light fitting.
09/06/14 - New SELF model
These are extremely popular with customers for converting mirrors using halogen or ballast transformers to new LED lighting and can also be used with the SELF Touch Dimmers.
This is a super flat version with a depth of 14mm. Superb for bathroom mirror LED conversions.
This is a NON dimmable LED driver.
As the only UK supplier of SELF products we are pleased to stock this very popular transformer.
These are new to the market and very popular.
We use these sensors to switch on the lighting in our stock cupboards. They can also be used in wardrobes and inside kitchen cupboards to replace those large, bulky, old fashioned door pin switches.
A wave of the hand turns the lighting on and a second wave of the hand turns them off. It's that simple!!
This sensor switch is ideal for clothing or kitchen cupboards and with the sensor switch being compact it is easily hidden.
The push in IR sensor head is a discreet 13mm.
THIS MODEL CANNOT BE USED FOR BATHROOM MIRRORS OF ANY KIND!!
As the only UK supplier of SELF products we are pleased to stock this very popular sensor switch.
These are new to the market and very popular. High tech equipment at affordable prices.
We use these sensor switches built in to the side of mirrors located in our male and female toilets.
A wave of the hand turns the mirror lighting on and a second wave of the hand turns them off. It's that simple!!
This model comes with the push in IR sensor head.
26/12/23 - The SELF HZK218C can replace this model.
As the only UK supplier of SELF products we are pleased to stock this very popular PIR sensor.
These are new to the market and very desirable.
With the current Covid-19 situation still active and the UK Government's emphasis of 'Hands, Face, Space', to avoid close contamination and stop the spread of Covid-19 this PIR sensor switch is ideal for this exact scenario.
With the SHE-B-250 fitted no longer will you need to physically touch a wall or mirror mounted on off light switch.
Simply walk into the room and the controller will turn on the switch for output when it detects motion and will turn off automatically after the adjustable delay without the detection of motion.
This PIR sensor switch is ideal for hospital wards, Government buildings, public street toilets, prisons, nightclub toilets etc where only motion is required to switch on a lighting appliance or wall mounted mirror.
Jindel have been quiet for some years concentrating on the Chinese & Taiwan wholesale lighting market.
Jindel are still producing some of the smallest 12v halogen transformers currently available on the market and now branching into LED Drivers.
Jindel have taken note of our comments regarding a gap in the market for an oblong shaped constant voltage LED driver and have produced the MH-QD range.
Many light fittings are installed with an oblong halogen transformer and circular LED Drivers will simply not fit inside the transformer housing due to their larger diameter..........
Cue the MH-QD1617 LED Driver
The QD1617 is the only oblong LED Driver currently on the market capable of replacing the Eaglerise SET150CS, SET160CK, SET210CS and the Huibolong HTV160C1 and HTV210C1 halogen transformers.
1) Larger secondary terminal block allows a thicker core wire to be inserted.
2) Red LED light located on the secondary side that illuminates when the LED Driver is powered.
3) 8 separate air vents for increased ventilation when in use.
4) An earthing point is supplied on the primary terminal block.
5) Suitable for the North American market.
6) 5w minimum loading.
7) Large 12mm diameter central hole (M12 studding).
This model is not compatible with halogen light bulbs.
We don't know what is going on over at Jindel, but their designers are coming out with some cracking models that are going to transform the LED market. Whatever they are putting in the coffee, it's working!! GO JINDEL!!
This is a constant current 550mA LED Driver with a secondary of 22-35v and a 15-20w output.
